Universal adapter For cooling system tester
Univ. adap., cool. sy. test. 19.5-38 mm
UNIADAPT-F.CLSYSTEST-085350-SML
Register now and access more than 125,000 products
Datasheets(X)
Particularly for Japanese vehicles
1. Adapter rubber and opening to be sealed must be free of oil, grease and glycol residues
2. Press the adapter into the radiator opening or expansion tank and seal by rotating the two adjustment wheels against one another
3. Connect radiator tester
4. Pump approx. 1.3 bar into the cooling system using the hand pump
5. The pressure in the cooling circuit must not drop by more than 0.2 bar within 10 minutes.
6. In the event of a drop in pressure, localise and eliminate potential points of leakage (e.g. water pump, hoses, cylinder head seal)
Caution: The universal adapter should never be immersed in cooling fluid as this causes fluid leakage at the valve when the pressure is released.
Last viewed
Safety Star disposable protective suit
HSCo Multi Performance machine tap for through holes DIN 371/376
Metric ratchet combination wrench with POWERDRIV®
Male thread plug-in nipple
PNEUMATIC IMPACT SCREWDRIVER DSS 3/4'' PLUS
Pliers assortment 4 pieces
Twist drill bit HSS DIN 338 type RN 118°
Segmented construction site diamond cutting disc
Twist drill bit HSCo DIN 338 type RN oxide
Serrated locking nut with locking teeth Steel strength class 8, zinc-plated, blue passivated (A2K)