Split pin ISO/WN 1234 steel zinc-plated
ISO/WN 1234 zinc plated steel
SPLTPIN-ISO1234-(A2K)-8X100
Register now and access more than 125,000 products
Nominal size d1 = 3.5 mm/4.5 mm/5.5 mm/7 mm not standardised according to ISO 1234
Replaces DIN 94
Datasheets(X)
 | |
Nominal diameter (d1) | 8 mm |
Length (l1) | 100 mm |
Longitudinal external diameter of ring (b) | 16.00 mm |
Transverse external diameter of ring (c) | 15.00 mm |
Length between two pins of a splint (a) | 4.00 mm |
Standards | ISO 1234 |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
System insert 4.4.1, pliers
Vacuum lifter With two movable heads
3/8-inch socket wrench insert, metric long
Hexagonal bolt with shank DIN 931, steel 12.9, plain
1/2-inch socket wrench insert, TX head For external TX screws, short
High-strength screw retainer
Ratchet combination wrench
Twist drill bit assortment HSCo DIN 338 type RN Oxide 19 pieces
High-end power LED torch WTX2 and LED head lamp SLA set
Tension springs with double eyelets assortment 368 pieces in system case 4.4.1. DIN 2097