Speed cutting disc For steel
Cutting disc for steel Speed
CUTDISC-SP-BLUE-ST-SR-TH1,0-BR22,2-D115
ZEBRA
Register now and access more than 125,000 products
- Very fast cutting times
- Extremely thin for precise, almost burr- and chatter-free cuts (very clean and cool cutting surfaces)
- Very easy to use and ensures user- and machine-friendly working
- Very good breakage resistance
- Storage: dry, at 20°C ambient temperature
- Work only with appropriate protective clothing
- Always use an appropriate protective cover when performing cutting work
- Only use undamaged discs
- Do not jam/tilt the discs during cutting - increased risk of breakage!
- Ensure proper contact pressure
- Always clamp cutting discs (straight design) with metal ring towards the machine
- For further information, please refer to the package insert
Complies with the most demanding safety requirements of European Standard EN 12413 and the OSA (the Organisation for the Safety of Abrasives)
Datasheets(X)
- Ideally suited to steel
- Particularly effective at cutting thin-walled pipes and profiles, thin metal sheets, bodywork panels etc.
Versatility (points system) | 1 of 4 points |
Service life (points system) | 3 of 4 points |
Cutting ability (point system) | 4 of 4 points |
Handling/user-friendliness (point system) | 3 of 4 points |
Cut quality (point system) | 3 of 4 points |
Diameter | 115 mm |
Thickness | 1 mm |
Drill hole | 22.23 mm |
Design | Straight |
Max. rotation speed | 13300 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Pneumatic impact screwdriver DSS 1/2'' Standard
Air tool fittings 1500 Series
1/2 inch torque wrench With push-through square drive and fine toothed ratchet head (72 teeth)
Chain pipe wrench
Socket wrench assortment 23 pieces
CA preparation unit size 2, lockable
Tool case
Scriber With coded steel handle and screwed in straight and curved steel needle
Stainless steel care spray
Pan head tapping screw shape C with H recessed head DIN 7981, A2 stainless steel, shape C, with tip