Special oil For pneumatic tools

Name: Special oil For pneumatic tools
Brand: Würth
SKU: 08930505

Special oil for pneumatic tools
PNOIL-1LTR

Art.-no. 08930505

EAN 4011231832151

All versions

Prices for customers after login

Special oil For pneumatic tools

Art.-no. 08930505

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: +254724257046

The special oil is especially suitable for use in pneumatic oilers.

Excellent protection against corrosion and wear

Active and effective even at low temperatures

Resin and acid-free

Silicone-free

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Contents	1 l
Container	Bottle
Colour	Yellow Brown
Smell/fragrance	Characteristic
Shelf life from production	60 Month
Pour point	-25 °C
Density	0.883 g/cm³
Min. flashing point	230 °C
Acid-free	Yes
Silicone-free	Yes
Resin-free	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 3

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 4

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.