Silicone protective paste
Silicone paste
SILICON PASTE 100 GR
Art.-no. 0893221100
EAN 4099618803017
Register now and access more than 125,000 products
- Water-repellent
- Chemically insert
- Good electrical properties
- Insulates and protects under extreme temperature fluctuations
- Extremely temperature-resistant from -40°C to +200°C
The silicone paste should be stored in a cool, dry place.
Conforms to MIL and NATO standards S 8660 C
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage/processing conditions. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.
Datasheets(X)
Protects and insulates rubber parts, metal parts, relays, cable connections, battery terminals, electric motors, lubricates small static systems (O-rings, seals etc.) in vehicle interiors and exteriors and also in the electrical, metal and construction industries. Caution: Never treat windscreen wipers with silicone.
General protection of rubber parts.
Lubricates small systems on manual and industrial machines (O-rings, seals etc.).
Protects chrome parts against rusting caused by road salt.
Prevents ice formation in freezer compartments, refrigerator and ski bindings.
The silicone paste should be applied to clean and dry surfaces (degrease with silicone remover if necessary). The silicone paste can be applied with a brush, paintbrush, spatula or paste gun. The silicone paste can be diluted with aliphatic, aromatic or chlorine-containing solvents to enable thinner layers to be applied.
Chemical basis | Polydimethylsiloxane |
Colour | Transparent, White |
Contents | 100 ml |
Acid-free | Yes |
Density | 1010 kg/m³ |
Density/conditions | 1010 kg/m³ / at 25°C |
Shelf life from production | 36 Month |
Weight of content | 101 g |
Max. temperature resistance | 200 °C |
Last viewed
Safety Star disposable protective suit
Battery-powered impact drill driver BS 18-A EC POWER COMBI
Hexagonal bolt with flange in accordance with MBN standard
XZN triple square bit assortment, 4 pcs.
TOOL SET IN BLOW MOULD CASE
Basic skin protection cream
Telescopic magnet
Vehicle air-conditioning service unit COOLIUS® A10
3/4 inch power adapter
PNEUMATIC IMPACT SCREWDRIVER DSS 3/4'' PLUS