Sealant remover

Name: Sealant remover
Brand: Würth
SKU: 08931000

Sealant remover
SEALREM-300ML

Art.-no. 08931000

EAN 4011231893756

All versions

Prices for customers after login

Sealant remover

Art.-no. 08931000

Prices for customers after login

Quantity

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: +254724257046

Removes sealing materials, adhesives, paints etc. in just minutes

Stable

No run-off on vertical surfaces

Notice

Protect painted surfaces

Check compatibility before use

Not suitable for delicate plastics, PVC and synthetic materials

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Wide range of uses on metal, wood, glass, ceramic, polyethylene and polypropylene

Instructions

Shake can well

Spray surface and leave to take effect for 5-10 mins

Process surface with a suitable tool

Contents	300 ml
Smell/fragrance	Alcohol
Colour	Light yellow
Chemical basis	Mix of organic solvents
pH value	10.6-11.0
Density/conditions	0.79 g/cm³ / at 20°C
Shelf life from production	24 Month
AOX-free	Yes
Silicone-free	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 3

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 4

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.