Ratchet combination wrench
Ratchet combination wrench, metric, retaining ring
RTCHCOMBIWRNCH-SWITCHABLE-SNAPRG-WS10MM
ZEBRA
Register now and access more than 125,000 products
Design: metric, straight
Drive: POWERDRIV bi-hexagon ring end with retaining ring, finely toothed, 72 teeth with reversing lever for clockwise and anti-clockwise rotation and 5° angle of rotation
Very rugged, strong ratchet tool for high tightening torques
Standard: max. torque according to DIN 899
Material: Chromium-vanadium steel
Surface: Basic body chrome-plated, matt satin finish, ring yellow-nickel-plated
Geometry: Jaw angle 15°, angled 15°, ring matt nickel-plated
Please note: This is a specialist tool, therefore the ring side is only suitable for loosening bolts to a limited extent.
Datasheets(X)
Loosen bolts using the open end and tighten using the ratchet mechanism on the ring end
 | |
Width across flats (SW) | 10 mm |
Length (L) | 159 mm |
Possible uses, 6-sided/12-sided metric | 10 mm |
Thickness of jaw (a1) | 5.3 mm |
Ring thickness (a2) | 7.3 mm |
Width of jaws (outside) (b1) | 20.5 mm |
External diameter of ring (d) | 20 mm |
Max. torque (F max.) | 59 Nm |
Material | Chrome-vanadium steel |
Surface | Chrome plated |
Last viewed
Deep cleaner for plastic
Twist Drill bits HSS ASME B94.11M TYPE RN
Polishing pad recessed
Twist drill bit HSCo DIN 338 type RN oxide
Compressed air conditioning unit Semi-automatic
External lens for helmet Solar II
Metric combination wrench with POWERDRIV®
Expanding nut, type 6 Suitable for long holes
1/2 inch socket wrench insert metric, hexagon, short
1/4" multi-socket wrench insert bi-hex, multi profile