Puller tool
Extractor tool
EXTRTL-SPNW300MM
Register now and access more than 125,000 products
- Cross-beam adjustment via hexagon nuts on pull legs
- Malleable cast iron cross-beam
- Nitrocarburised spindle
- High-strength legs
Datasheets(X)
After separating, the legs of the puller tool are screwed into the separating blade and the cross-beam is mounted. The spindle is screwed against the shaft. The part being extracted is pulled off gently and securely by tightening the spindle against the end of the shaft.
 | |
Min./max. external clamping width (A) | 90-300 mm |
Clamping depth (B) | 270 mm |
Spindle length | 280 mm |
Surface of the spindle | Nitrocarburised |
Material of spindle | Steel |
Material of cross-piece | Malleable cast iron |
Surface of the cross-piece | Zinc plated |
Width across flats | 27 mm |
Thread dimension | G 3/4 inch |
Last viewed
Air tool fittings 1500 Series
Metric double open-end wrench DIN 3110/ISO 1085
WÜPOFAST® zinc-plated yellow chipboard screw steel, zinc-plated yellow, full thread, countersunk head, PZ
Metric double open-end wrench DIN 3110/ISO 1085
Hexagon bolt with shank and fine thread DIN 960, steel 10.9, zinc-plated, yellow chromated (A2C)
Lid for storage boxes in sizes 2/3/4
1/2" multi-socket wrench one tool for all applications
Solder cable lug DIN 46211
Decorative trim adhesive tape
Pneumatic Ratchet Screwdriver DRS 1/2‘‘ Plus