For detailed information, other images and documents, please select individual articles from the following table.
Silicone protective paste
Based on polydimethylsiloxane oils and inert fillers
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
- Water-repellent
- Chemically insert
- Good electrical properties
- Insulates and protects under extreme temperature fluctuations
- Extremely temperature-resistant from -40°C to +200°C
The silicone paste should be stored in a cool, dry place.
Conforms to MIL and NATO standards S 8660 C
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage/processing conditions. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.
Protects and insulates rubber parts, metal parts, relays, cable connections, battery terminals, electric motors, lubricates small static systems (O-rings, seals etc.) in vehicle interiors and exteriors and also in the electrical, metal and construction industries. Caution: Never treat windscreen wipers with silicone.
General protection of rubber parts.
Lubricates small systems on manual and industrial machines (O-rings, seals etc.).
Protects chrome parts against rusting caused by road salt.
Prevents ice formation in freezer compartments, refrigerator and ski bindings.
The silicone paste should be applied to clean and dry surfaces (degrease with silicone remover if necessary). The silicone paste can be applied with a brush, paintbrush, spatula or paste gun. The silicone paste can be diluted with aliphatic, aromatic or chlorine-containing solvents to enable thinner layers to be applied.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!