Plastic adhesive REPLAST<SUP>®</SUP> Easy Fast - ADH-PLA-2C-FAST-50ML

Plastic adhesive REPLAST^® Easy Fast

Name: Plastic adhesive REPLAST ® Easy Fast
Brand: Würth
SKU: 08935003

Plastic adhesive REPLASTeasy Fast
ADH-PLA-2C-FAST-50ML
REPLAST

Art.-no. 08935003

EAN 4056807410197

All versions

Prices for customers after login

Plastic adhesive REPLAST^® Easy Fast

Art.-no. 08935003

Prices for customers after login

Quantity

x 6 pcs

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: +254724257046

For REPLAST^® Easy plastic repair system

An adhesive for virtually every type of plastic

No need for inconvenient use of different types of adhesive

Can be used for repairs and structural bonding

Special positive mixer

Optimum mixing with minimum volumes

Low adhesive loss (waste)

Quick to harden

Further work, such as sanding, is possible within an extremely short period of time

Excellent chemical resistance

Resistant to a wide range of liquids, such as petrol, many lubricating oils and ethyl acetate

Solvent-free

Notice

There may be adhesion problems in individual cases due to the coatings and release agents used in some cases in the plastic production process. Not suitable for PE (polyethylene), PP (polypropylene) or PTFE (polytetrafluor ethylene) plastics. Check material compatibility on an invisible area if necessary.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage/processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Cars:

Spoilers, radiator grills, panel clips, bumpers, brackets on headlights and radiators etc.

HGVs and buses:

Aprons, bumpers, air intake pipes, wheel arches etc.

Motorcycles:

All panelling

Instructions

The substrate must be capable of bearing loads and must be clean, dry and free from grease and rust. Old adhesive residues must also be removed. To do so, clean the surface with the plastic cleaner and apply the primer. The flash-off time must be observed. Discard some adhesive before screwing on the mixer nozzle. The first 2 cm of adhesive from the mixer nozzle should also not be used. When applying the adhesive, the mixer should remain in the adhesive to prevent bubbles forming. Observe the work instructions.

Contents	50 ml
Chemical basis	Two-component polyurethane
Processing time	1.5 min
Colour	Black
Density	1.225 g/cm³
Min. initial strength	10 min
Min./max. processing temperature	15 to 25 °C
Min./max. temperature resistance	-30 to +100 °C
Silicone-free	Yes
Shore D hardness	79

including:

2 x

STATSTATMIXTUB-ADH-2C

Description: For 2C plastic adhesive

Quantity: 2 x

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).