PURlogic Xpress 1-component foam applicator gun
FMGUN-1C-(PURLOGIC-XPRESS)-PLA
Art.-no. 08911524
EAN 4038898472902
Register now and access more than 125,000 products
- The optimised sealing system eliminates the need to readjust the needle seal due to a special seal combination
- Low dead load for easy and effortless handling
- Ergonomic grip is secure in your hand
- Foam dispensing quantity can be adjusted to ensure a clean spraying pattern
A polyurethane foam can should always be screwed onto the PURLOGIC
® guns. The gun should be cleaned with PURLOGIC® Clean at regular intervals. Please refer to the instructions for use. Can be used for all Würth 1-component gun grade expanding foams. When used with other polyurethane foam cans, the function should be tested beforehand
Datasheets(X)
The gun is used to apply 1-component polyurethane foam. All commercially available gun foams in aerosol spray cans with standard screw-on adapter are suitable. Being able to precisely adjust the PU foam quantity means that the gun is suitable for controlled dispensing and customised filling of joints, thereby enabling precise and secure installation.
Check that the gun is suitable and works before use. Shake the foam can vigorously and remove the cap. Screw the gun onto the upright can. Work swiftly to prevent foam escaping from the side of the adapter (if necessary, remove with PU foam cleaner, art. no. 0892160). Lightly press the trigger to fill the gun with foam. The gun is now ready to use.
Material | Plastic |
Colour | Red |
Product weight (per item) | 427.000 g |
Last viewed
External lens for helmet Solar II
Flat blade fuse ATO ISO 8820-3
Thin-walled heat-shrink hose shrink rate 2:1 without internal adhesive
Car shampoo
Screwdriver PH striking cap with hexagon shank
1/2-inch impact socket wrench insert hexagon, metric, long
Aluminium wheel rim cleaner
1/2" socket wrench insert for TX screws, short
Flat blade fuse ATO ISO 8820-3
Disposable breathing mask P2 Light with valve