Liquid Metal Fe 1

Name: Liquid Metal Fe 1
Brand: Würth
SKU: 0893449

Liquid Metal Fe1
LIQUMET-FE1-500G

Art.-no. 0893449

EAN 4011231896009

All versions

Prices for customers after login

Liquid Metal Fe 1

Art.-no. 0893449

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: +254724257046

Fast-acting repair system, ideal for installers and workshops in the metal processing sector.

High-quality two-component reaction resin system that exhibits characteristics similar to those of metal due to its special formula

The ideal mixing ratio of the components (A:B = 1:1, pressing out two strands of the same length from the tubes) makes incorrect mixing of the repair compound virtually impossible

Specifically designed for smaller repair jobs where a quick turnaround is required

Can be applied with a spatula and does not run, which also makes vertical application possible

After hardening, Liquid Metal Fe1 can easily be processed in the same way as metal with lathing, milling, drilling, filing or thread cutting

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet 1

Safety data sheet 2

Certificates/ Documents

Application area

Liquid Metal Fe 1 is a solvent-free, two-component substance that can be used to repair metallic and ceramic materials.

Particularly suitable for filling moulds, and for sealing and covering leaking areas.

Instructions

The application surfaces must be clean, dry and free of grease. For pre-treatment, refer to the technical data sheet.

Mix components A and B homogeneously 1:1. Apply the mixture immediately with a spatula (short pot life).

Please note the enclosed application instructions.

Mixing ratio	Component A: Component B = 1:1
Density	2.8 kg/m³
Density conditions	Components A and B mixed
Colour	Grey
Min./max. gelation time	7-12 min
Min./max. curing time	4-24 h
Fully hardening/curing conditions	Room temperature
Conditions for gelation time	at room temperature
Working life	5 min
Conditions for working life	at 20°C, 20 g total mass
Viscosity/consistency	Pasty
Min. tensile strength	12.5 N/mm²
Min. combined tension and shear resistance	14.5 N/mm²
Coefficient of thermal expansion	0.0004 1/K
Min. compressive strength	70 N/mm²
Min./max. temperature resistance of the hardened material	-60 to 120 °C
Weight of content	500 g

Suitable glove:

Product

Description

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 1

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.