Welcome to Würth Kenya For trade customers only

Foodstuffs lubricating oil

Foodsafe lubricating oil NSF
LUB-FDSAVE-300ML

Art.-no. 08931071
EAN 4038898317807

Prices for customers after login
Foodstuffs lubricating oil

Art.-no. 08931071

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Colourless special lubricant with creeping properties for the food industry as well as for the beverage, pharmaceutical and clinical industries

Low-viscosity and colourless special lubricant with creeping properties


  • Excellent lubricating properties in hard-to-reach areas thanks to low viscosity

  • Excellent creeping and cleaning effect ensures optimum protection of machines and conveyor areas exposed to water

  • Economical

  • No visual impairment with occasional contact between the lubricant and product


  • Odourless and tasteless

  • Good material compatibility on a variety of surfaces such as aluminium, stainless steel, plastics compatible with mineral oil, e.g. PP, PE, PS, nylon, polycarbonate glass, epoxy glass fabric-base plastics, sealing rings.

  • Displaces water

  • Optimum anti-corrosion properties

  • Resin and acid-free

  • Resistant to ageing

  • Silicone and AOX-free

  • In this context, the product may come into occasional contact with food

  • Does not harm skin and mucosa

  • Non-toxic
Proof of Performance
  • NSF H1-registered (no.: 126582), corresponds to H1 requirements

  • Approved by the LGA (Bavarian State Office of Commerce, Nuremberg, Germany)
  • NSF H1-registered (no.: 126582), corresponds to H1 requirements

  • Approved by the LGA (Bavarian State Office of Commerce, Nuremberg, Germany)

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Colourless special lubricant with creeping properties for the food industry as well as for the beverage, pharmaceutical and clinical sectors.

Instructions

Clean and degrease the parts to be lubricated. Then spray on a thin coat.

Chemical basis

Medical white according to DAB 10

Lubricant system

Oil

Colour

Transparent

Smell/fragrance

Odourless

Density

0.86 g/cm³

Density conditions

at 20°C

VOC concentration (CH)

22.3 g/l

Min. temperature conditions

-10 °C

Max. temperature conditions

180 °C

Min. flashing point

200 °C

Ignition temperature

510 °C

Kinematic oil basis viscosity

31 mm²/s

Conditions for viscosity of oil basis

at 20°C

Silicone-free

Yes

Acid-free

Yes

Resin-free

Yes

AOX-free

Yes

Resistance against

Aging

Contents

300 ml

Container

Aerosol can

Shelf life from production

24 Month

Viscosity31 mm²/sat 20°C
14 mm²/sat 40°C
Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information