Food-grade silicone acetate - SILSEAL-ACE-FOODGRADE-CLEAR-310ML

Food-grade silicone acetate

Name: Food-grade silicone acetate
Brand: Würth
SKU: 08925501

Acetate food grade
SILSEAL-ACE-FOODGRADE-CLEAR-310ML

Art.-no. 08925501

EAN 4045727706282

All versions

Similar products

Prices for customers after login

Food-grade silicone acetate

Art.-no. 08925501

Prices for customers after login

Quantity

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: +254724257046

Special, high-quality sealant for sealing in food processing and drinking water sector, as well as for aquarium construction

Tested product characteristics

Meets the requirements of NSF/ANSI Standard 61

Sensor testing for food

Tested by Stegmann Laboratory

Can be used in food handling and processing operations

Tested by ISEGA-Forschungs- und Untersuchungsgesellschaft mbH Aschaffenburg (Germany)

In aquarium construction

Can be used in the drinking water sector

KTW test (contact of drinking water with non-metallic materials) by The Ruhr District Institute of Hygiene in Gelsenkirchen (Germany)

In drinking water sector

DVGW Worksheet W 270 – Hygiene Institute of the Ruhr Region, Gelsenkirchen

Resistant to micro-organisms

In cleanrooms

Adheres to a wide variety of materials

Adhesion to a range of substrates present in the food processing sector

Also adheres to artificial stone

High degree of resistance to chemicals

Good smoothing properties

Building material class B2 according to DIN 4102

Notice

As a general rule, in line with DIN 52452 Part 4, sealants should not be painted over

Remove excess smoothing agent from surfaces

Please observe the "General Notes on Application for Sealants" overview sheet. Further information in the technical data sheet.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For sealing joints that come into contact with drinking water or food, e.g. in commercial kitchens, butcher's shops, breweries, on sales counters and in walk-in refrigerators and for aquarium construction.

Instructions

The surface must be load-bearing, clean, dry and free from grease, rust and water

Do not use in heavy rain

The joint dimensions must be observed

Prime the joints with PE back-fill material

A primer, e.g. with Silicone primer, improves the adhesion for absorbent or porous surfaces

Smoothing agents must only be used before the skin formation time and must be completely levelled after use with a smoothing tool. Excess product next to the joint must also be removed immediately, otherwise staining may occur.

Please observe the "General Notes on Application for Sealants" overview sheet. Further information in the technical data sheet.

Container	Cartridge
Contents	310 ml
Chemical basis	Sauer silicones (acetate systems)
Colour	Transparent
Continuous motion absorption	25 %
Shore A hardness	16 +/- 2
Min./max. processing temperature	5 to 40 °C
Min./max. temperature resistance	-40 to 180 °C
Full curing speed/conditions	3 mm/d / 23°C and 50% relative humidity
Min. skin-formation time	12 min
Conditions for skin-formation time	at 23°C and 50% relative humidity
Min./max. full curing speed /conditions	2-3 mm/d / 23°C and 50% relative humidity
Min. breaking elongation	500 %
Fungicidal properties	No
Building material class	B2 - Normally inflammable
Shelf life from production	18 Month
Building material class/conditions	B2 - Normally inflammable / in accordance with DIN 4102
Density/conditions	1.04 g/cm³ / at 20°C
Density	1.04 g/cm³

Additive article:

Product

Description

Quantity

Price
/PU

MANCLKGGUN-CART-QUICK-310ML

Art.-no. 0891000001

Standard design, semi-open, made of sheet steel with quick-release device

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).