Diamond cutting disc Long-life hard material
Diamond cutting disc Longlife hard material
CUTDISC-DIA-LL-HARDMAT-BR22,23-D180MM
ZEBRA
Register now and access more than 125,000 products
X-shape
The X-shaped ridges of the segment sides extend the service life considerably. They reduce the lateral contact surface of the segment in the material. This results in less friction and thus considerably less heat generation and strain on the segments. At the same time, the X structure increases the effective active cutting surface, thereby distributing the load more evenly. The increased active cutting surface also enables comparatively quick cutting for a disc that offers an optimised service life.
Optimum bond for hard materials
The diamond bond is specially designed for hard materials and thus ensures optimum support for the diamonds from the first cut to the last.
Reliable direction indication
The ventilation holes are arranged as arrows that remain visible and unmistakable even after a long period of use.
- Diamond cutting discs become blunt at excessively high rotation speeds and wear too rapidly at insufficient peripheral surface speeds
- If ease of cutting is lost (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts
- Cut larger workpiece cross-sections into several sections (swing cut)
- Work without applying pressure – the weight of the machine is sufficient. Increased pressure causes increased wear.
- Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs – risk of injury!
- Despite the level of safety offered by the tool, always wear safety glasses and clothing while working
- Observe the information on the label (max. rotation speed), the restrictions of use and the safety instructions
- The direction arrow on the disc must match the machine's direction of rotation
- Must not be used for lateral grinding
- Use the appropriate protective hood
- Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)
- If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury
Datasheets(X)
For dry and wet cutting
Versatility (points system) | 3 of 4 points |
Service life (points system) | 4 of 4 points |
Cutting speed (point system) | 3 of 4 points |
Cut quality (point system) | 2 of 4 points |
Diameter (Ø) | 180 mm |
Drill hole | 22.23 mm |
Segment height | 12 mm |
Segment thickness | 2.6 mm |
Number of segments | 14 PCS |
Segment connection | Laser |
Max. rotation speed | 8500 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Screwdriver PH striking cap with hexagon shank
Active glass cleaner
Starlock saw set
Bond + Seal structural adhesive
3/4-inch impact socket wrench insert hexagon, metric, short
Hexagon nut DIN 934, steel I10I, plain
Hot air blower HLG 2000 COMPACT
Hammer drill bit box Plus Quadro-L Vario, 7 pieces
1/2" socket wrench insert Triple square, long
Snipe nose pliers DIN ISO 5745