Carbide burr with MX teeth
Tungsten carbide bur CYL without spur cut TiAlN-MX
MILBIT-CYL-TC-ZYA-MX-TIALN-D6-WL18
ZEBRA
Register now and access more than 125,000 products
< 60 HRC), cast iron, welded seams, hardened steels and hard plastics
Good surface quality coupled with high degree of material removal
Time-consuming reworking minimised.
TIALN coating
Wear protection coating with a hardness of 3600 HV and a heat resistance up to 900°C.
Datasheets(X)
Deburring using robotics, removing casting burrs on inner edges, smooth finishing of surfaces, dressing and deburring welded seems in visible areas, shaping, chamfering, truing work when performing assembly and general deburring work.
For the correct rotation speed and cutting speed (Vc) for the material to be processed, please refer to the application table.
Form | Cylindrical |
Length | 50 mm |
Shank diameter | 6 mm |
Teeth type | MX |
Surface | TiAlN |
Service life (points system) | 4 of 4 points |
Last viewed
Screwdriver slotted striking cap with hexagon shank
Ratchet combination wrench
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
1/2 inch impact socket wrench insert hexagon, metric, short
All-rounder injectable mortar WIT-VM 250
1-inch impact socket wrench insert hexagon, metric, short
1/4" multi-socket wrench insert bi-hex, multi profile
Hexagon nut, low profile, with clamping piece (non-metal insert) fine thread
Metric combination wrench with POWERDRIV®
Electronic solder no. 1