Welcome to Würth Kenya For trade customers only

Car shampoo

Car shampoo
CLNR-VEH-CARSHAMPOO-5LTR

Art.-no. 089301205
EAN 4011231831901

Prices for customers after login
Car shampoo

Art.-no. 089301205

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

For gentle, complete cleaning of vehicles
  • Can be used manually and also in pressure cleaners

  • Gentle on the skin and environmentally friendly

  • Fast-separating in waste water in accordance with German Ecological Standard Test B 5105

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Removes all kinds of dirt from vehicle paintwork, chrome, rubber, vinyl, plastic etc.

Instructions

Add 10 ml car shampoo to approx. 15–20 litres of warm water. Pre-rinse the vehicle. Shampoo the vehicle with a sponge and then rinse off with clean water. To obtain optimum results, wipe dry with a chamois.

Contents

5 l

Product weight (per item)

5384.000 g

Container

Canister

Chemical basis

Water, soap and glycol

Smell/fragrance

Faint odour

Colour

Colourless

AOX-free

Yes

Silicone-free

Yes

Bio-degradable

Yes

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 2
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 3
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information